Get 5 DTF Screen Transfers and 2 Patches for JUST $19.99
For Soft Products like: T-Shirts, Apparel, Hats, Bags, Aprons, Jackets, Koozies..etc. Works on all Materials, Colors, Stretch Levels and more!!!
- No Need to Pre-Press or Pre Iron! - Removing moisture is unnecessary. Only do a prepress if you so desire.
- Position Your Design - Take your time to line up your patch in the desired location on your item. Normally, there is no need to use heat-resistant tape. You'll get a feel for when this is needed.
- Press- Make sure your Iron has NO WATER in it!!! Turn Iron on Cotton/Linen setting! You cannot damage the transfer by pressing with more heat, pressure, or time -- within reason. However, too much heat can damage your garment, so test first and use parchment paper or protective guard sheet to protect your garment from a direct iron.
- After pressing, let your transfer rest until it is cool to the touch (minimum of 15-30 seconds). Once cool, lift the transfer from one corner and gently peel back. We have a saying, which is, don't use your hands, use your EYES. This ensures every piece of your design is adhering to your item. If not, stop peeling, lay it back down, and trouble shoot as follows. (1.) If some or all of the design does not transfer AND it was cool when peeling, it means there was not enough heat, pressure, or time. Press your transfer again with more pressure and time first (+5-10 seconds). (2.) If that doesn't work, try 15°F heat increments until you find a sweet spot. You truly cannot damage the transfer by pressing multiple times.
- Final Press & Wash Instructions - Place the parchment paper or a single layer t-shirt material over the design and press again for 15 seconds to soften the design, increase durability, and remove shine. If you want a shiny finish, cover with a protective guard sheet for the final press. When washing, flip shirt inside out, was on cold and dry using low heat or hang.
https://youtu.be/Zm45--IFGp0?si=cykGn2-n_6gMqgZT
Distinction & Disclaimer
Our patches are extremely durable. Keep in mind they can still wear down or loose adhesion depending on the conditions & circumstances. For that reason, we can't make warranties or guarantees and should not be used for mission-critical applications or equipment.
°